Hardwood flooring: Facts

Installation of wood flooring is possible without any tools read more. It can be done with mortars, flooring-sized styles or stretching tools. Installing hardwood floors can be done with familiar tools like drills or circular saws. Hire hardwood floor installers with experience to get a better finish.

Hardwood flooring installation
Hardwood floor installation requires artistry. You need creativity and knowledge. Although you can do this yourself using some instructions and instruments, it may be better to hire a hardwood contractor with experience. Choose professionals who can provide an installation which is beautiful, accurate, and effective. Together, you can get the results you desire. How to lay wood floor?

Nail down Method
Commonly, solid wood strip is installed on the subfloor with a hammer. The thickness and size of the strip will determine how much wood you need. Adapters can be used for wood that is thinner. Installing solid strips and planks onto solid subfloors is best done with solid wood.

Staple Down method
You will need 1 to 2 inches of staples to install hardwood flooring. To drive staples into subflooring or hardwood, air-filled gun are used. There are a variety of options for staple guns, depending on what type you choose. The contractor will know what type of staple gun you’ll require.

Stick Down Method
The contractors will attach the subflooring to the hard wood flooring using adhesives. There are many different adhesives available on the market. You should ensure that your installer uses the adhesive that you recommended. If you choose the wrong adhesive, it can affect the finish.

This is an entirely new approach. Installers don’t usually mechanically attach hardwood flooring to subfloors. Most often, hardwood floors are not mechanically attached to subfloors by fitters. In order to prevent the flooring from slipping, they use a thin padding between it and the subfloor. To hold the floating floor together, they use the recommended wood glue in the tongue-and groove of each piece. It’s moisture-resistant and reduces sound transmission. It is softer than other materials, and they also add an aesthetic to any project.

How to prepare for the installation
You should remove all furniture before the contractor begins work. By doing this, you will avoid any damage occurring during the installation. Installers can do this work for an extra cost. Doing the work yourself can help you save money. The subfloors need to be prepared for hardwood. Your subfloor might need to be changed if you hire an expert in flooring. You should not be afraid to ask your contractor about the details of your project. You should make sure that your subfloors are as clean and as flat as possible. While you are walking with your contractor, discuss any concerns or issues that you may have.

Leave a Reply

Your email address will not be published. Required fields are marked *